Product Details:
Minimum Order Quantity | 1 Piece |
Discharge Range | 30-60 LPM |
Number Of Stages | Single-stage Pump |
Type | Electric |
Motor Phase | Single Phase |
Head | up to 23 mtr |
Maximum Discharge Flow | 100 - 500 LPM |
Power | 1 HP |
Power Source | Pump Only |
Warranty | 12 months |
Discharge Outlet Size | Less than 1 in |
Features | submersible sewage / dewatering pumpset |
Insulation | IP 68 Protection |
Maximum Start/Stops | 20 |
Pump Housing | Cast iron |
Pump Shaft | stainless Steel |
Suction Bracket | Cast Iron |
Discharge Nozzle | Cast Iron |
Country of Origin | Made in India |
Additional Information:
Product Details:
Motor Horsepower | 1 - 3 HP |
Product Details:
Brand | Saniflo |
Usage/Application | Commwercial Use |
Model Name/Number | Sanicubic 2 Classic |
Weight | 35kg |
Power Rating | 2 x 1500 W |
Number Of Available Inlets | 5 |
Electrical Class | 1 |
IP Rating | IP68 |
Maximum Incoming Water Temperature | 70 DegreeC Intermittently (max 5 min) |
Control Box IP Rating | IPX4 |
Maximum Recommended Depth | 11m |
Tank Volume | 45L |
Vent Diameter | 50mm |
The Sanicubic 2 Classic contains two separate, load balanced pumps with high performance macerating systems and will operate alternately. In the event of inflow overload, both motors run at the same time, or in the unlikely event that one motor fails, the other one will take over.
The Sanicubic 2 Classic is a tough, reliable macerator pump which contains two separate load balanced macerator systems which operate alternately ensuring even wear of motors. It is ideal for busy business and large domestic situations. The unit can handle waste water from WC’s, a basin, sink, washing machine, dishwasher, shower, bath, and bidet. The Sanicubic 2’s new design means the motors are easily removable for servicing and maintenance as is the water level indicator. It has two alarms for ultimate safety both are hard-wired alarms. The Sanicubic 2 Classic has four inlets, the centre height of the inlets is 140mm and it discharges through 50 mm pipework. It has a working temperature of 35ºC, however it will handle temperatures up to 75ºC for short periods. The Sanicubic 2 has a tank capacity of 45 litres and a flow rate 13m³/h. It can be connected to a Building Management System. The Sanicubic 2 Classic comes with a 2 year warranty.
Designed, made and tested in our factory in France and with 60 years of expertise and innovation, the Sanicubic 2 offers you peace of mind and with the back up from our service team there’s never been a better time to install a SFA.
Product Details:
Power | 1500 WATTSX2 |
Brand | SFA SANIFLO |
Motor Horsepower | 0.1 - 1 HP |
Power Source | Electric |
Product Type | LIFTING STATION |
Usage/Application | drain water pumping |
Model Name/Number | SANICOM 2 |
Max Flow Rate | 16 M3/HR |
Head | 12 MTR |